Back to blog
GuideOpenClawHostingVPSMac miniAI agents

OpenClaw Hosting in 2026: VPS, Managed Host or a Mac

November 15, 20268 min readby Macyou Team

OpenClaw can be hosted in four ways: on a Linux VPS you set up yourself, on a managed host that sets it up for you, on a Mac you own, or on a rented Mac. The gateway itself is light. OpenClaw’s documentation states no memory or processor minimum for it and lists macOS, Linux and Windows as supported, so with a hosted model a small VPS at about $5 to $24 a month is enough. A Mac is the right host when the agent needs macOS itself, such as iMessage or the menu bar app, or when the model should run on the same machine. Facts from OpenClaw’s documentation were checked on 15 November 2026.

OpenClaw hosting options compared

HostWhat you doCost a monthPick it when
Linux VPS, self hostedInstall OpenClaw, secure the server, update itabout $5 to $24A hosted model, chat channels that need no Mac
Managed or one click hostSign up; the provider installs and runs the gatewaySet by the providerYou do not want to run a server
Mac mini you ownInstall OpenClaw, keep the Mac awake and online$899 up front, then $0.53 to $9.30 of electricityiMessage, the macOS app, a local model at home
Rented dedicated MacInstall OpenClaw over SSH on a Mac in a data centerfrom $80 billed annually, $99 billed monthlymacOS or a local model without hardware at home

VPS prices are the range in Composio’s September 2026 roundup of OpenClaw hosts. Electricity is Apple’s published draw for the M6 Mac mini, 4 W idle and 70 W at most, at the 2026 US average of 18.2 cents per kWh. The hosting bill is usually the small part: with a hosted model the tokens cost more, as worked out in OpenClaw cost per month.

What OpenClaw needs from a host

  • Node.js 24.16 or 26.1 and newer. The installer adds it when it is missing.
  • A machine that stays on. The remote access page recommends hardware that stays powered on and says a laptop that sleeps often should hand the job to a persistent host.
  • No open port. The gateway binds to loopback on port 18789 by default, and the documentation calls loopback with SSH or Tailscale Serve “the safest default”.
  • Disk that survives restarts. OpenClaw keeps its state in ~/.openclaw by default. On container platforms put that folder on a persistent volume.

The documentation gives one memory figure, and it is for Docker: at least 6 GB for building the image from source, which the ready built images avoid.

A Linux VPS

This is the cheapest way to keep an agent online. OpenClaw’s install page points to a provider picker that names DigitalOcean, Hetzner, Hostinger, Fly.io, GCP, Azure, Railway, Northflank, Oracle Cloud and Raspberry Pi. Installation is the same one line installer as on a Mac, followed by openclaw gateway install for the background service.

The work is in what follows: updates, backups of the state folder and security. For Docker on a public server the documentation sends you to its page on security hardening for network exposure, and it tells you to keep the gateway loopback only unless you are sure you need a wider bind. Reach the control page through an SSH tunnel instead:

ssh -N -L 18789:127.0.0.1:18789 user@gateway-host

A managed or one click host

Several companies sell OpenClaw already installed. Hostinger has a one click OpenClaw page, and OpenClaw’s documentation also lists Railway and Northflank among its deployment targets. You skip the server work and depend on the provider’s setup. Before you choose one, check four things:

  • Whose model key is used: your own key with the provider you choose, or credits sold by the host.
  • Whether you get shell access, which you need for plugins and for fixing things yourself.
  • Whether you can export the state folder if you leave.
  • Which channels work. A host that runs Linux cannot run iMessage on its own.

A Mac, yours or rented

These parts of OpenClaw need macOS:

  • iMessage. It works through the imsg tool on a Mac where Messages is signed in, with Full Disk Access and Automation permission. The gateway may run elsewhere and call that Mac over SSH, but a Mac has to be part of the setup.
  • The menu bar app and Voice Wake, which need macOS 26.2 or later.
  • Tools that act on the Mac: screen capture, notifications and control of Mac apps.

The other reason is a local model. On Apple silicon the model can use nearly all of the Mac’s memory, so the agent and the model share one machine and no tokens are billed. A small VPS has neither the memory nor a graphics processor for that. The memory each model needs is in best local models for OpenClaw, and the full setup on a Mac is in OpenClaw on a Mac mini.

Macyou rents dedicated Mac minis and Mac Studios by the month or by the year, in data centers in Georgia, Germany and the United States. An M4 Mac mini with 16 GB costs $99 a month, or $80 a month billed annually, and memory goes up to 256 GB for local models. Your macOS account is an administrator with sudo, you connect over SSH with a key, and you install OpenClaw yourself with the standard installer. Nothing is installed for you, and billing is monthly or annual, not hourly. Pricing.

Rent a dedicated M4 Mac mini

Which one to choose

  • A hosted model and Telegram, WhatsApp, Slack or Discord: a small Linux VPS.
  • No wish to touch a server: a managed host, after the four checks above.
  • iMessage, the macOS app or a local model, and a Mac at home that can stay on: that Mac.
  • The same needs without hardware at home, or more memory than your own Mac has: a rented dedicated Mac.

Questions

What is the best hosting for OpenClaw?

For a hosted model, a small Linux VPS at about $5 to $24 a month. For iMessage, the macOS app or a local model, a Mac. A managed host suits you if you would rather not run a server.

How much memory does OpenClaw need on a VPS?

OpenClaw’s documentation states no minimum for the gateway. Its only memory figure is 6 GB for building the Docker image from source. Memory matters far more when a local model runs on the same machine.

Can I host OpenClaw on a Mac mini?

Yes. It needs macOS 13.5 or later and the same installer as on Linux. The steps, including the settings that keep it running, are in our guide to OpenClaw on a Mac mini.

Is it safe to open the OpenClaw port to the internet?

The documentation advises against it: keep the gateway on loopback and reach it through an SSH tunnel or Tailscale Serve. A wider bind must use gateway authentication.

Sources